Accessories

Acrylic Mirror Adhesive 290ml Tube (White).

Mirror Adhesive can be used as a sealant and adhesive when mounting mirrors. Be sure you have a sealant gun too. If using it as an adhesive a tube will cover about 1 square meter of material.

Self Adhesive Magnetic Tape KIT: 20mm wide x 15mtr long x 1.5mm Thick approx.

Kit includes a roll of 'A Side' and a roll of 'B Side' plastic sheet application tape.

Available in either White Magnetic or Brown Magnetic (Steel tape is always White)

Self Adhesive Magnetic Tape KIT: 20mm wide x 15mtr long x 1.5mm Thick approx.

Kit includes a roll of 'A Side' and a roll of 'B Side' plastic sheet application tape.

Available in either White Magnetic or Brown Magnetic (Steel tape is always White)

Size: 3mm x 2440mm

PVC Profile - J Trim White Edging Strip

Used to give a clean finish to the exposed edge of a PVC sheet during installation.

Dimensions: 30mm x 15mm x 3mm Trough

Size: 3mm x 3000mm

PVC Profile - J Trim White Edging Strip

Used to give a clean finish to the exposed edge of a PVC sheet during installation.

Dimensions: 30mm x 15mm x 3mm Trough

Size: 3mm x 2440mm

The H Section Division Bar enables vertical wall cladding panels to be joined and sealed. The bar not only protects the joints, but prevents the build-up of dirt. In addition it allows for thermal expansion of the sheet.

Size: 3mm x 3000mm

The H Section Division Bar enables vertical wall cladding panels to be joined and sealed. The bar not only protects the joints, but prevents the build-up of dirt. In addition it allows for thermal expansion of the sheet.

Size: 25mm x 2440mm

PVC Profile - External Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 25mm x 3000mm

PVC Profile - External Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 50mm x 2440mm

PVC Profile - External Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 50mm x 3000mm

PVC Profile - External Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 25mm x 2440mm

PVC Profile - Inside Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 25mm x 3000mm

PVC Profile - Inside Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 50mm x 2440mm

PVC Profile - Inside Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Size: 50mm x 3000mm

PVC Profile - Inside Corner (4 Sizes Available)

Provides a small curved corner where 2 sheets meet.

Industrial Strength Adhesive 290ml tube of All Weather adhesive.

Waterproof, industrial strength and heat resistant. Applied with standard silicone gun.

Lean To Flashing Profile
Colour: White
Length: 3000mm

Lean to flashing profile for roof pitches 5 degrees – 45 degrees. Suitable for capex 40, 50, 60, 70 and snap down bars. 

Lean To Flashing Profile
Colour: Brown
Length: 3000mm

Lean to flashing profile for roof pitches 5 degrees – 45 degrees. Suitable for capex 40, 50, 60, 70 and snap down bars. 

Lean To Flashing Profile
Colour: White
Length: 6000mm

Lean to flashing profile for roof pitches 5 degrees – 45 degrees. Suitable for capex 40, 50, 60, 70 and snap down bars. 

Lean To Flashing Profile
Colour: Brown
Length: 6000mm

Lean to flashing profile for roof pitches 5 degrees – 45 degrees. Suitable for capex 40, 50, 60, 70 and snap down bars. 

Clear polycarbonate joining (Snap type) profile, suitable for joining Multiwall or solid polycarbonate sheeting between 4mm & 10mm.
3000mm length and is sold as 1 piece (Base & Cap).

Clear polycarbonate joining (Snap type) profile, suitable for joining Multiwall or solid polycarbonate sheeting between 4mm & 10mm.
4000mm length and is sold as 1 piece (Base & Cap).

Clear polycarbonate joining (Snap type) profile, suitable for joining Multiwall or solid polycarbonate sheeting between 4mm & 10mm.
5000mm length and is sold as 1 piece (Base & Cap).

Clear polycarbonate joining (Snap type) profile, suitable for joining Multiwall or solid polycarbonate sheeting between 4mm & 10mm.
6000mm length and is sold as 1 piece (Base & Cap).