Search results for: 'Value medications https://bookmarkindexing.com/story19000047/5-essential-elements-for-metal-clad'

Polycarbonate H Profile Clear

Length: 16mm x 6000mm

Clear Polycarbonate H Profile.Suitable for joining multiwall or solid polycarbonate sheets.

PVC profiles are supplied in lengths of 3000mm and 6000mm to fit polycarbonate sheet widths of 4mm, 6mm,10mm and 16mm.

PVC U Profile
Colour: White
Size: 10mm x 2100mm

A PVC plastic profile supplied as an accessory to close the end of Multi-wall rooofing sheet.

Suitable for use with 8mm & 10mm Multiwall Sheets.

PVC U Profile
Colour: Brown
Size: 10mm x 2100mm

A PVC plastic profile supplied as an accessory to close the end of Multi-wall rooofing sheet.

Suitable for use with 8mm & 10mm Multiwall Sheets.

Aluminium F Profile
Colour: White
Length: 10mm x 3.0mtr

The Aluminium is used at the edge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.

Suitable for use with 8mm & 10mm Multiwall Sheets.

Aluminium F Profile
Colour: Brown
Length: 10mm x 3.0mtr

The Aluminium F profile is used at the edge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.

Suitable for use with 8mm & 10mm Multiwall Sheets.

Aluminium F Profile
Colour: White
Length: 10mm x 4.0mtr

The Aluminium F profile is used at the edge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.

Suitable for use with 8mm & 10mm Multiwall Sheets.

Aluminium F Profile
Colour: Brown
Length: 10mm x 4.0mtr

The Aluminium F profile is used at the edge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.

Suitable for use with 8mm & 10mm Multiwall Sheets.

Capex 40 Gable End Finishing Profile
Available in Brown or White
Available in 3000mm or 6000mm Lengths

Capex 40 end finishing profile suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Capex 60 Gable End Finishing Profile
Available in Brown or White
Available in 3000mm or 6000mm Lengths

Capex 60 gable end finishing profile suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Capex 40 Wall Flashing Profile
Available in Brown or White
Available in 3000mm or 6000mm Lengths

Suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Capex 60 Wall Flashing Profile
Available in Brown or White
Available in 3000mm or 6000mm Lengths

Suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures.

Capex Glazing Bar

Capex Bar Capex 40/60 bars for roof pitches of 5deg+. The capex bar is used where multi-wall polycarbonate roofing sheets, or solid flat sheets meet on the roof rafter.

A robust aluminium section suitable as standard for the ridge with a roof pitch angle of 15-35 degrees. Available Sizes 3000mm & 6000mm & in White or Brown.

Aluminium radius end caps providing a radiused end finish for cresfinex M2 Ridge bar.

Size: 100mm
Available in Brown or White

Aluminium radius end caps providing a radiused end finish for cresfinex M2 Ridge bar.

Size: 100mm
Available in Brown or White

Multiwall Polycarbonate Roofing Fixing Buttons.

Pre-Packed Nylon fixing buttons complete with screws

Supplied in a pack of 10 with foam washers and suitable length No.12 Pan Headed Slotted Screws

6mm – we offer white only.

10/16/25mm we offer white & brown.

Silicone 310ml (794)n

A low modulus, non acid toxy silicone for use with polycarbonate roof sheet.

As some silicones can attack polycarbonate, a neutral silicone needs to be used with polycarbonate roof sheet.

Use neutral silicone to prevent leaks at joints and at all points where the roof sheet has been penetrated by fixing screws.

Sheet Size: 1000mm x 1000mm
Sheet Thickness: 4mm
Sheet Colour: Clear

Acrylic sheet, PLEXIGLAS® or perspex, can provide insulation, reduced condensation and provide lightweight strength.

Free Cut to Size Service on ALL Acrylic PLEXIGLAS® Perspex Sheets

Sheet Size: 1025mm x 1525mm
Sheet Thickness: 4mm
Sheet Colour: Clear

Acrylic sheet, PLEXIGLAS® or perspex, can provide insulation, reduced condensation and provide lightweight strength.

Free Cut to Size Service on ALL Acrylic PLEXIGLAS® Perspex Sheets

Sheet Size: 2050mm x 1525mm
Sheet Thickness: 4mm
Sheet Colour: Clear

Acrylic sheet, PLEXIGLAS® or perspex, can provide insulation, reduced condensation and provide lightweight strength.

Free Cut to Size Service on ALL Acrylic PLEXIGLAS® Perspex Sheets

Sheet Size: 3050mm x 2050mm
Sheet Thickness: 4mm
Sheet Colour: Clear

Acrylic sheet, PLEXIGLAS® or perspex, can provide insulation, reduced condensation and provide lightweight strength.

Free Cut to Size Service on ALL Acrylic PLEXIGLAS® Perspex Sheets

Sheet Thickness: 2mm 
Sheet Size: 3050mm x 2050mm
Sheet Colour: Clear

Our PETg sheet offers excellent strength to weight ratio, outstanding optical clarity, superior chemical resistance, durability, good fire performance and is 100% recyclable. Key benefit is the exceptional ease of workability and thermoformability it offers, particularly at low temperature for fabrication, print and display applications.

Sheet Thickness: 3mm 
Sheet Size: 3050mm x 2050mm
Sheet Colour: Clear

Our PETg sheet offers excellent strength to weight ratio, outstanding optical clarity, superior chemical resistance, durability, good fire performance and is 100% recyclable. Key benefit is the exceptional ease of workability and thermoformability it offers, particularly at low temperature for fabrication, print and display applications.

Sheet Thickness: 4mm 
Sheet Size: 3050mm x 2050mm
Sheet Colour: Clear

Our PETg sheet offers excellent strength to weight ratio, outstanding optical clarity, superior chemical resistance, durability, good fire performance and is 100% recyclable. Key benefit is the exceptional ease of workability and thermoformability it offers, particularly at low temperature for fabrication, print and display applications.